Learn the steps to install Outdoor Front Maintenance Led Display

Now the installation of full-colour LED display, whether indoor or outdoor, are towards the direction of "streamlining", P4.81 front maintenance LED display, can be installed and removed from the front, easy to repair, the following details Outdoor Front Maintenance Led Display Installation.

l  Outdoor Front Maintenance Led Display installation steps

l  Outdoor Front Maintenance Led Display main features

Outdoor Front Maintenance Led Display installation steps

Outdoor Front Maintenance Led Display installation steps, first respectively screw the magnets on the four corners of the P4.81 module, respectively insert the power cable and the line into the Outdoor Front Maintenance Led Display. then align the magnets behind the module with the magnet holes on the case, install the first module, and then install the second module. Install the first module, then install the second module to the case, then install the third module to the case, then install the fourth module to the case, until a case is installed. When removing the module, put your hand on the module, gently pull out the module, remove the power cable of the module, you can complete the disassembly of the module. When installing the Outdoor Front Maintenance Led Display, start with the leftmost box in the bottom row, then proceed to install the second one until one row of boxes is installed, and so on, then install the second row of boxes, then install the third and fourth rows of ...... until the installation is Finish. After connecting all the wires, light up the screen. So far, the installation steps of the module, box, the whole screen has been fully explained, Outdoor Front Maintenance Led Display can achieve front and rear maintenance, convenient for subsequent maintenance and installation, installation of the box and module without tools, you can easily install completed

Outdoor Front Maintenance Led Display Main Features

The main features of the Outdoor Front Maintenance Led Display are as follows: Module waterproof: single module waterproof design, the module protection level of IP66, new material protection back cover, maximum reduction of the module weight. Simple case: unique case design, effectively reduce the weight and cost of the screen body. Data cable: new design wire instead of the traditional aviation plug, data transmission speed is faster and more stable. Before the maintenance of the display screen body is thin, does not take up space, save material, is lightweight, easy to install, suitable for installation of indoor screens, directly hung to the wall, easy maintenance. After the maintenance of the general for the outdoor screen, because the outdoor screen for waterproof considerations, from the front, can not be disassembled, the outer frame cost is higher

Shenzhen Atop Led Opto Electronic Co., Ltd is a high-tech enterprise committed to Outdoor Front Maintenance Led Display application and its supporting products research and development, design, production, marketing, engineering, the company gathered a large number of LED display R & D, production management, engineering The company has gathered a large number of experienced people in LED display research and development, production management, engineering services, etc. We have an advanced quality management system, a perfect marketing service network and a fast after-sales service system.