The installation and difference between front service and rear maintenance

The Outdoor front service led display is for the special environment, the LED display installed, can not be maintained from behind the LED display, but only from the front of the maintenance structure way. Outdoor front service led display and after the maintenance of what is the difference and installation way of understanding

l  Outdoor front service led display has three ways

l  The difference between front maintenance and rear maintenance

Outdoor front service led display has three ways:

The conventional way is the magnet installation, Outdoor front service led display module or unit board through the magnetic force of the magnet and display structure tightly sucked together, maintenance can be done by taking down the LED display module or unit board, you can maintain the screen body.

The front maintenance of the module of the box, facilitate the disassembly of the led display, but this installation will cause the problem of heat dissipation.

The third way is Outdoor Front service-led, in the case of the need for waterproof, front maintenance. We address this situation, the display module LED display analysis, set out to solve this problem, and finally get a breakthrough, Outdoor front service led display solution is to fix the LED module screws from the front of the module for locking, module front screw holes, behind the box, need to bring the nut. The cost of this way is relatively high.

The difference between front maintenance and rear maintenance

The maintenance mode of the LED display is divided into front maintenance and after maintenance. As the name implies, the front maintenance is from the front of the box for maintenance and maintenance, after maintenance is from the back of the box for maintenance and maintenance.

Front maintenance: Outdoor front service led display module using magnetic components magnetically fixed in the box. When you want to disassemble, use the suction cup tool to suck the LED module can take down the LED module. The advantage of front maintenance is that the LED display case can be thinner, LED module disassembly is also more convenient and efficient.

After maintenance: LED module using magnetic components or screws fixed in the case. When the LED display installation space is larger, the use of the post-maintenance method is also more efficient.

Generally speaking, conference display, security monitoring display, control command centre display and so on indoor small pitch display is to use the front maintenance method. It is characterized by interior design, wall mounting, space-saving, thin and beautiful. To more thin and light LED display box, higher box maintenance efficiency, Outdoor front service led display installed in the outdoor can also be used before the maintenance method. For example, the LED smart light pole screen, the front maintenance design eliminates the tedious screw disassembly, and the LED module can be taken out directly using suction cup tools.

Shenzhen Atop Led Opto Electronic Co., Ltd guarantees the high reliability and advancement of its structure and electronic performance with self-developed technology, a complete range of products, and good tracking service throughout the process to bring high value-added consumer enjoyment to our customers.