Publish Time: 2021-09-17 Origin: Site
Installation method step by step introduction
With the continuous development of commercial buildings, with a comfortable leisure environment, combined with amusement activities, recreational facilities, cultural display of the commercial atrium and become a joyful and pleasant place in the city, but also an important place for the leisure life of the public. Commercial spaces pay more attention to the inner atmosphere, commercial buildings began to install commercial LED screens to increase ornamental, indoor commercial LED screen installation methods and standards are divided into three installation methods.
1. Wall-mounted
2. Suspended
3. Inlay
Applicable environment: This installation method is suitable for the following environment: the wall must have sufficient load-bearing capacity, and easy to use expansion bolts, ordinary bolts or easy to weld the wall, to facilitate the pegging of the display on the wall fixed.
(1) Before installation, we must understand whether the wall has sufficient load-bearing capacity for fixing the commercial LED screen
(2) Determining its wall has sufficient load-bearing capacity after the actual measurement according to the actual requirements of the customer, make a detailed record, and do a good job on the wall scale, scale must be clearly marked, to better the next step.
(3) According to the height of the commercial LED screen to determine the number of pendants to be used, and do a good job of marking.
(4) Fixed display pendant firstly, fix the display pendant at both ends. And use the horizontal tube measurement to determine the two pendants in the same plane. After fixing the two ends of the pendant to the two pendant planes as the standard installation of other pendants.
(5) Installation of commercial LED screen, hanging the display on the installed pendant, with screws to connect the display frame and pendant firmly.
Applicable environment: Commercial LED screen with no wall around and no available fixed point. And the roof has enough load-bearing capacity.
(1) Before installation, we should know whether the roof or other fixed roof has enough load-bearing capacity to fix the display.
(2) After determining whether the roof or other fixed roof has enough load-bearing capacity, make actual measurements according to the actual requirements of customers, make detailed records, and make a good scale on the roof or other fixed roof, scale, must be marked clearly, to better carry out the next step.
(3) According to the height of the display to determine the number of pendants to be used, and do a good job of labelling. Specific steps are as follows: first, measure the length and width of the display, and make a record. Then calculate the density of the pendant, that is, the distance between the pendant and the pendant must be carried out following the standard, especially small display at least not less than 2 pendants. To fix the display more firmly.
(4) Fixed display hanging pendant first fixed both ends of the display hanging pendant. And measure with pulling wire. After fixing the two ends of the pendant to the two hanging pendants as the standard installation of another intermediate hanging pendant.
(5) The commercial LED screen hanging in the installed lifting pendant later, with screws to the display frame and hanging pendant connected firmly.
Applicable environment: All commercial LED screens that require concealed installation
(1) Before installation, you must understand the finished size of the display, and then do the size of the inlay, and the finished size of the display shall prevail.
(2) Put the whole display into the inlay.
(3) Fixed display bezel, with screws to display bezel and around the connection can be firmly connected.
The commercial LED screen should be installed smoothly, and the distance between the plane around the frame and the outer surface of the inlay should be the same. The error shall not exceed 5㎜Shenzhen Atop Led Opto Electronic Co., Ltd can provide free technical training according to customers' needs, including the operation and maintenance training of commercial LED screen, and customers can purchase with confidence.
COB Technology Helps LED Screens Break Through Spacing Limits, Creating Core Visual Presentations
Outdoor Front Maintenance Led Display Unit Board Failure Maintenance Solution
Learn the steps to install Outdoor Front Maintenance Led Display
Selecting the right Outdoor Front Maintenance Led Display based on basic parameters
The installation and difference between front service and rear maintenance
Outdoor front service led display safety precautions and disassembly
Understand the Outdoor Front service led display related accessories introduction